How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique procedure to add the second key. This requires an electronic handheld computer, referred to as Tech-2 that is operated by the dealer. Then it is necessary to purchase a new transponder. key need to be purchased.
It is an excellent idea to rotate your keys so that one does not wear out faster than the other. This will help to keep your keys in good condition.
Replacement Case
The new key fobs do not look like the older Saab keys. They are equipped with electronics that make it difficult to duplicate. This has made car theft a lot more difficult than it was just a few years ago. It also makes it more expensive to replace lost keys.
Saab 9-3 owners must have two working keys. It is expensive to replace a lost key as it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers charge between $100-$200 for this.
There are ways to cut down on these high costs. saab key replacement will utilize the code of an extra key to cut a brand new metal blade for less than what the dealer charges. The key must be exactly the same as the original to allow it to function in your vehicle.
You can also change the case yourself by following these steps. You'll require an flathead screwdriver and patience. Using the screwdriver, slowly tear the plastic away and remove the emergency key from the case. When the case is opened, remove all electronics and put them in the new case. Make sure you insert the correct badge and key back in the case too.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive part that can be quickly and easily replaced. The YouTube video of Cyclone Cyd demonstrates how to replace the remote fob battery in just four steps. This tutorial is suitable for any modern saab key fob however the procedure might differ slightly.
The first step is to find the button that lets off the backup key on the fob. It's usually near the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole in this button. This will allow you to open the fob's case to allow you to replace the battery.
Once the new CR1632 battery is installed it is possible to reassemble the remote key fob and program it to your car. The entire process should take no more than an hour, if not less. It is a very simple procedure that doesn't require any special tools.
The process is a bit more complicated in the event that you lose your key, but it is possible. The dealer must first read the VIN of the vehicle and order an additional TWICE module and key blade with the correct unique code. The dealer will then have to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob is equipped with an internal battery that is used to lock and unlock your car. They have a limited life span and will eventually die. This is a problem that occurs in all vehicles. The good news is you can replace the battery on most key fobs without having to replace the entire case. You can purchase replacement fobs on Amazon that include all the electronics already in place, so you'll simply open the case and replace the old batteries. It is important to note that you'll have to take out the emergency key first, and you can do this by inserting an incredibly small screwdriver with a flat head into the slot in the middle of the case. The case will split as you turn the screwdriver around it.
If you're planning to replace your keys, keep a spare in your possession. This will save you lots of money. If you have an additional key, you can request the dealer to cut it and program it to your car. This is much less expensive than purchasing a new key fob.
If you do not have a spare key one, you can add an additional key to your car, but this requires a lot research and effort. Adding a second key costs several hundred dollars and it requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.
Replacement Ignition
The new SAAB 9-3 features an alarm system that is more sophisticated that is based on a key code. If you lose your only key, it can be expensive to add another one since the car needs to be equipped with a specific computer and also be programmed to accept a new key. Even a dealer can charge hundreds of dollars to program the new key in the event that they are unable to do it.
If you've lost the only working key and a dealer is able to replace your car's computer (known as the CIM or SAAB TWICE) to make a replacement, and will charge top dollar for it. Instead, we can reprogram the EEPROM of your current car computer to make it ready for a new key, and save you over 50% of what you'll have to pay at a dealership.
If you've owned a SAAB 9-3 a long time, you know that the ignition keys aren't very durable. They can get extremely sticky, and the buttons are known to fall off of them from time to time It is recommended that you consider replacing your ignition key if it isn't performing as it should. It's not as difficult as it seems to replace the ignition key. With the proper tools, it can be accomplished in a matter of minutes.